Call Us Now:

714-869-1322

My Account

Shopping Cart 0
$0.00

Home 24 x 33 8 Mic Natural Liners 1000/case

  • Home
  • 24 x 33 8 Mic Natural Liners 1000/case
Loading...

24 x 33 8 Mic Natural Liners 1000/case

Be the first to review this product
In stock
SKU
HD243308CL
$35.55
24 x 33 8 Mic Natural Liners 1000/case (12-16 Gal.)
Add to Wish List Add to Compare

High Density (HD) Trash Can Liner Advantages

- HD trash trash bags are an excellent economical choice for heavy, wet trash and soft refuse as long as there are no sharp or irregular shaped objects

- HD trash can liners have a superior vapor and moisture protections, and are USDA and FDA approved for food use

- HD trash bags have smaller, lighter cases, which lower freight, storage and warehousing costs

 

Specifications:

24 x 33, Natural, 8 mic, 1000/case

12-16 Gallon

 

WHAT SIZE LINER DO I NEED?

Bag Width: To calculate the proper width of the trash can liner for your container, simply divide the circumference of your container by 2.

Square Container Circumference: Circumference = sum of all four sides added together.

Round Container Circumference: Circumference = diameter multiplied by 3.14.

Bag length: (round & square containers) add the height of the container, plus 4-5 inches for overhang.

Write Your Own Review
You're reviewing:24 x 33 8 Mic Natural Liners 1000/case
Your Rating
Question How To Use Mytee s300h Tempo Heated Extractor?
Answer Before using, check the machine for any warning, caution, or danger symbols. Mytee uses symbols to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.
  • To power the Tempo™, plug the power cord into a 20 amp wall outlet.
  • Next, fill the solution tank. The Tempo™ solution tank can be filled up from a pitcher or other water container via the opening.
  • After a cleaning tool is connected and the solution tank is filled, switch on the vacuum and the pump in any order.
  • Next, turn the pump switch on and pull the lever on the cleaning tool to release air in the line. Hold the lever until a steady flow of water comes out of the wand. Once the pump is primed and there is pressure in the solution line, turn on the heater switch and wait a few minutes for the water to heat up. Once water is heated, turn on the vacuum and begin cleaning.
  • For best results when extracting, do one wet pass followed by two dry passes. This ensures you’re not over-soaking the material and also gives the heater time to catch up.
  • The Tempo™ has a small filter on the top of the vacuum stack in the recovery tank. This filter should be checked and cleaned after each use. Regular flushing of the solution system with Mytee® System Maintainer helps keep lines clean and prevents chemical build-up, improving pump life, performance, and pressure.
For more information on how to use the Mytee s300h Tempo Heated Extractor check out the user manual.
Question How Good Is A Mytee Carpet Cleaner?
Answer The Mytee s300h Tempo Heated Extractor is one of the most powerful carpet cleaners on the market. The machine features a 600 watt heated S-300H Tempo that packs a lot of power into its small size. It also has a two-stage vacuum motor that significantly reduces dry times for better and faster carpet cleaning overall. It’s small in size and only weighs 26 pounds so you can easily store and travel with it, and it won’t put added pressure on your back while cleaning.
Question What Can I Clean With The Mytee s300h Tempo Heated Extractor?
Answer The Mytee s300h Tempo Heated Extractor is perfect for auto detailing, carpet cleaning, and upholstery spotting. The Mytee s300h makes it easy to treat spots and stains thanks to its inline heater that quickly breaks up tough grime and dirt. For best cleaning results browse upholstery cleaners, carpet care solutions, and more cleaning chemicals for your cleaning needs and price point.
Question Is This The Full Unit Or Do I Also Need To Buy The Hose And The Connector?
Answer Yes, this is the full unit. Included with your purchase of the Mytee s300h Tempo Heated Extractor is a 4″ 8400P Air Lite™ Upholstery Tool, an 8′ vacuum, an internal solution hose combo, a Heat guard Hose Wrap (Part # G079), and a 25′ power cord (Part # E631). For more information on the features of the unit, visit the details page at UltraClean.
Question What are the replacement components and where do I find them on UltraClean?
Answer The replacement components of this unit can be found on UltraClean’s website under the category parts page when you search the machine you are looking for. You can view over 40 suggested parts for the Mytee s300h and see what would work best for what you need to replace. The Heat Guard Hose Wraps that come with the original unit are available in a pack of 5 at UltraClean Supply here.
Question Where can I buy replacement parts for the Doodle Scrub?
Answer Replacement Doodle Pads can be purchased at Ultra Clean Supply and are available in light, medium, heavy, and extra heavy duty. Pads specifically designed for different flooring are also available, such as the grout and tile Doodle Pad. Other mechanical parts related to the mechanics can be purchased directly from the manufacturer, Square Scrub®. These parts include chargers, base plate, scrub cover, and more.
Question What is the Doodle Skate for and how do I use it?
Answer The Doodle Skate by Square Scrub® is a baseboard scrubbing attachment that works with the EBG-9 Doodle Scrub. The same motion and pivot that the Doodle Scrub uses to clean floors is transferred to baseboards with the same rectangular scrubbing pads. Simply slide the Doodle Skate over the scrubbing head and tighten the screw to connect the two pieces. Attach the handle and hose, engage the motor, and roll the Skate along the baseboard or floor-adjacent area. The attachment ensures full contact with the wall and makes hard work easy and cleans often-neglected surfaces. Non-marking wheels and an easy carrying handle make sure the job is smooth and simple.
Question Is the Doodle Scrub battery-powered?
Answer The Doodle Scrub is available in a battery-powered model in addition to the corded model. The Freedom line from Square Scrub® allows for one hour of continuous battery-powered use without the hindrance of a cord. Simply plug the handle into the charger and have a second on hand to use while the other charges. With multiple Doodle Scrub options, choose the right model that best meets your needs.
Question How do you use the Drieaz Milgo Plus?
Answer Dri-Eaz Milgo Plus should be used at a dilution ratio of 1:64. It can be applied after flooding or sewage incidents to inhibit the growth of mildew and mold on both porous and non-porous surfaces. Milgo Plus is a hospital-grade antimicrobial that kills SARS-COV-2 (COVID-19), MRSA, and a range of bacteria, viruses, and fungi that frequently present themselves after flooding and sewage backups.
Question Where can you buy the Milgo Plus?
Answer Milgo Plus is available online from Ultra Clean Supply in gallon jugs. Easily order online from one of the largest distributors of cleaning equipment and supplies in the United States. Perfect for bulk necessary projects, clean-ups, and professional uses.
Question What does the Milgo Plus protect against?
Answer Milgo Plus protects against mold and mildew in addition to being a powerful antimicrobial that kills SARS-COV-2 (COVID-19), H1N1, and others. After sewage backups, flooding, and water damage, use Milgo Plus to inhibit bacterial growth and control urine, perspiration, and sewage.
Question How do you clean the filter on a Dyson hot and cool fan?
Answer In addition to replacing the filter on your Dyson Hot and Cool Fan, you can wash the filter in cold water. Power off the fan, remove the filter, and rinse the filter under cool water. Do not use any soap or detergent, just water. Gently squeeze the filter and repeat until the water runs clean. Before returning the filter to the fan, allow it to dry fully, usually about 24 hours. Do not dry it using any heat including a microwave, dryer, or open flame.
Question How do you change the filter on a Dyson hot and cool fan?
Answer To replace the carbon filter on your Dyson Hot and Cool Fan, power it off and unplug it from the wall. Start by removing the outer cover by sliding the side buttons down the sides of the fan. This releases the outer cover that protects the filter. Gently lift out the filters, which have a honeycomb pattern that protects the black filter material. Replace with new carbon filters of the same model and design, snap the outer covers back in place, and plug it back in. To reset the filter countdown, press and hold the ‘Oscillation’ button on the remote for five seconds. The screen will then show a five-second countdown and then a checkmark, confirming the filter reset. To replace the HEPA filter on your Dyson Hot and Cool Fan, power it off and unplug it from the wall. Remove the outer cover by sliding the side buttons down the sides to release this outer shell. The HEPA filter remains attached to the outer cover while the carbon filter remains attached to the Hot and Cool Fan itself. Separate the white HEPA filter from the half-cylinder cover and replace it with a new, Dyson HEPA filter. Repeat with the other side. Replace the outer covers back on the fan and snap them back into place. Plug the fan back into the wall, power it on, and reset the filter countdown. Using the remote, hold the ‘Nighttime’ button for five seconds. The screen then should show a countdown of five seconds before displaying a checkmark that confirms the HEPA filter reset.
Question How do you use the Dyson hot and cool fan without the remote?
Answer The Dyson Hot and Cool Fan HP04 can be used without the remote by downloading the compatible smartphone app, Dyson Link. Through the app, you can adjust settings and features, including fan angle and positioning. While previous models of the Hot+Cool Fan could be operated without the remote and using the power button, the HP04 relies on smartphone usage.
Question How cold does the Dyson hot and cool fan get?
Answer The Dyson Hot and Cool Fan goes down to a temperature of 34°F. The fan also reaches up to a heating temperature of 99°F.
Question How energy efficient is the Dyson hot and cool fan?
Answer The Dyson Hot and Cool Fan utilizes multiple technologies to optimize energy use across heating, cooling, and fan features. While some features of the fan may use more electricity than compared to similar appliances, other features utilize far less electricity than comparable appliances. The use of an internal thermostat means the fan adjusts accordingly and only heats to the temperature you’ve selected, similar to other comparable space heaters. However, the Dyson Hot and Cool Fan is not ideal for garages, basements, attics, and other uninsulated spaces due to the features that attempt to make up for heat loss. Overall, the Dyson is comparable to other space heaters and fans on the market with added features such as Dyson Link as well as other safety features.
Question Where can I get a Dyson hot and cool fan replacement filter?
Answer Dyson Hot and Cool fan replacement filters can be purchased directly from the manufacturer. The Hot and Cool fan requires both a carbon filter (black and attached to the body of the fan) and a HEPA filter (white and attached to the filter covers when you remove them). The built-in timer will alert you when it is time to replace the filter.